2011 HYD-MECH VW-18 SERIES II

ONE - USED HYD-MECH VERTICAL BANDSAW
Hydraulic Drive: .5 HPCapacity @ 90 deg: Standard Head: Rctngl:18?Wx22?H, Rnd: 17.5
Hydraulic Tank Capacity: 4 US Gal.Not Defined 3 Degree Cant. Head: Rctngl: 18?Wx20.75?H, Rnd: 17.5
Capacity @ 45 deg: Standard Head: Rctngl:18?Wx15?H, Rnd: 12.5
Capacity @ 60 deg: 3 Degree Cant. Head: Rctngl: 18?Wx14?H, Rnd: 12.5
Max tilt to right: 30 degrees
Max tilt to left: 30 degrees
Blade speeds: 65 - 385 SFM
Blade dimensions: 1.25? x 16? 3?
Blade drive type: 5 HP (240 volt, 3 phase)
Coolant tank capacity: 12 US Gal.
Working Height: 36.5?
Vise type: (hydraulic / manual) Hydraulic
Dimensions: 36?W x 94.5?L x 96?H
Weight: 2,700 Lbs.
Capacity @ 60 deg: Standard Head: Rctngl:18?Wx10.25?H, Rnd: 10.25?MACHINE CONSTRUCTION & FEATURES
Machine Base - The machine base is designed and produced with electro-welded steel components for maximum rigidity and support. The saw head carriage is guided by high quality linear ways and bearings. A 12-gallon coolant tank is built into the base.
In Manual mode - the control interface displays blade speed, blade tension. All powered functions can be controlled through the manual switches and pushbuttons.
In semi-automatic mode - the interface displays blade speed, LED Readout for the band tension, feed rate, and number of pieces cut. In this mode, material is cut and the blade retracts/shuts off automatically. The display can be set to display information in several different languages.
5 HP Motor - Heavy-duty gearbox and 5 HP, AC inverter drive controlled motor. Blade speed is easily adjusted from the control console and the wide range of available band speeds allows for efficient cutting of many types of material.
Blade Drive - The blade drive motor is controlled by a Mitsubishi AC inverter drive. Provides smooth operation and infinite adjustment from 65 to 385 SFM.
Head Feed System- Dual hydraulic control with feed rate and feed force adjustments.
Blade Wheels - High quality cast iron wheels with heavy-duty wheel & gearbox shaft bearings.
Adjustable Head Cant - 3 Degree Canted head (NEW Adjustable Saw head that can cut at 90 deg and be adjusted to cut at 3 deg cant) ? the machine is capable of cutting with the saw head at 90 degrees and the saw head with a 3 degree cant. The Quick Change Column is standard on the new VW18 Series II. This feature allows the saw head column to be set either upright at 90 Deg or at a 3� forward cant.
Blade Guides - Replaceable carbide insert guides housed in two heavy duty guide arms provide cut accuracy of + / - .002? per linear inch of material. A mechanically adjusted idler side guide arm allows for easy adjustment for proper guide arm spacing.
Vising - Dual Full stroking hydraulic vises.
Laser Light Projects a crisp line of laser light along the blade line. This feature can be used for fast length measurements or as a cut marker.
Powered Blade Brush - Driven off the blade drive wheel the 3? wire brush keeps the blade gullets clean, helping to maximize blade performance and life.
Blade Tensioning ? Mechanically adjusted blade tensioning. Allows for quick and easy un-tensioning for blade changing. LED Band tension is located on the control panel.
Coolant System - A centrifugal pump immersed in the 12-gallon coolant reservoir delivers ample coolant flow through carbide faced and nozzle guides. A flow cock is present for coolant quantity adjustment.
Hydraulic System - A hydraulic pump supplies system pressure. The system pressure through 3-position directional valves controls vising, head advance/retract.
Hyd-Mech?s DDF System -
Provides easy adjustment of both head feed rate and cutting pressure. Machine sawing chart provides proper blade speed, tooth pitch, feed rate and feed force recommendations. Saw head control includes fast approach control feature for quick set ups.
Electrical System - The electrical control components are housed in a compartment in the front of the machine. Components and wiring are neatly laid out and labeled for easy troubleshooting.
Controls - Conveniently located on an articulating console on the front of the machine, the interface pushbuttons allow the operator to manually control all machine functions including emergency stops.
Blade Breakage Switch ? Function of the blade tension pressure gauge/switch, will shut the machine off when the blade breaks during operation.