Sold

USED HYD-MECH MODEL M-20A 20" X 30" FULLY AUTOMATIC MITERING HORIZONTAL BANDSAW

Saws, Miter

Overview
Description
Specifications

Manufacturer:

HYD-MECH

Model:

M-20A

Year:

2009

Stock #:

11244

Serial #:

T0109694

2009 HYD-MECH M-20A automatic mitering horizontal bandsaw, 20"x30" cutting capacity, 10 hp, PLC 500 controller, hydraulic vise, overhead bundling clamps, programmable mitering. chip auger, conveyors. Ideal for bundle cutting varied material shapes and sizes.

ImperialMetric

Rect-Cap (W)	30"	762 mm
Rect-Cap (H)	20"	508 mm
Power	10 hp	7.5 kW
Control	CNC	CNC
Dimensions	140” x 90” x 66”	140” x 90” x 66”
Weight	7,700	7,700

Brand: Hyd-Mech
Model: M-20A

Specifications
Max. cutting cap. 90 deg, round: 20”
Max. cutting cap. 45 deg, round: 20”
Max. cutting cap. 30 deg, round: 14”
Max. cutting cap. 90 deg, square: 20” x 20”
Max. cutting cap. 45 deg, square: 19” x 20”
Max. cutting cap. 30 deg, square: 12” x 20”
Max. cutting cap. 90 deg, rectangular: 20” x 30”
Max. cutting cap. 45 deg, rectangular: 19” x 20”
Max. cutting cap. 30 deg, rectangular: 12” x 20”
Max. degree of miter: 30 degrees
Blade dimensions: 20’6” x 1-1/2” x .050”
Blade guides: Carbide
Guide arm (manual / powered): Powered
Blade speeds: 50 - 350 FPM
Number of speeds: Infinite
Blade motor: 10 h.p.
Blade drive type: Motor to gearbox
Blade tension type: Hydraulic
Blade wheel size: 22”
Hydraulic motor: 3 h.p.
Coolant type: Flood
Coolant tank capacity: 9 gallons
Maximum feed length: 33”
Table height: 32”
Vise type: Hydraulic
Currently Wired: 440 volt 3 phase
Dimensions: 140” x 90” x 66”
Weight: 7,700 Lbs.

PLC 500 - fully programmable controller that allows for automatic production of jobs consisting of double angle parts. Machine can automatically swing the head, alternating between two different programmed angles, producing parts with a different angle on each end.

Full Capacity Overhead Bundling - hydraulically powered overhead clamp that moves down on the material from above. Its downward (clamping) and upward (unclamping) movement are controlled and timed with the opening and closing of the moveable vise. Very effective and necessary for bundle cutting various material shapes, widths & sizes. Can also be effective in dampening of cutting vibration.

Variable Vise Pressure - allows for adjustment of the clamping pressure of both vises. Recommended for thin wall tubing and other light material applications where standard vise pressure may deform the material.

Out of Stock Switch - mounted on the shuttle vise, when the vise closes and no material is between its jaws, the machine hydraulics will shut down. (The cut in progress at the time of the switch being tripped is allowed to be finished before shut down occurs) This option allows the machine to be left unattended with no danger of the machine continuing to cycle with no material left.

Vertical Rollers - two 3” diameter rollers mounted vertically at each side of the end of machine’s infeed conveyor. Assists in material alignment.

Heavy duty full stroke vises.

Cast iron guide arms and wheels with a rigid pivot point.

Powered blade chip brush.

heavy duty motor and gear box with variable frequency drive system.

Work light.

Chip auger.

(2) 10' roller conveyors

We put our Bandsaws through a 20 Point Inspection and Repair Process assuring immediate performance when they hit your floor.