USED HYD-MECH MODEL M-20A 20″ X 30″ FULLY AUTOMATIC, MITERING BANDSAW, Stock #10794, Year 2000

Description:

USED HYD-MECH MODEL M-20A 20" X 30" FULLY AUTOMATIC, MITERING BANDSAW, Stock #10794, Year 2000

Manufacturer date: 2000

Brand: Hyd-Mech
Model: M-20A

Capacity:
@90 degrees: 20" x 30"
@45 degrees: 20" x 18"
@60 degrees: 20" x 12"
Mitering capability: 90 - 30 degrees 
Blade dimensions: 1-1/2" x 20'6" x .042"
Blade guides: Carbide
Coolant type: Flood
Blade drive: 10 H.P.
Blade speeds: 50 - 350 FPM
Blade wheel diameter: 22"
Hydraulic drive: 3 H.P.
Hydraulic tank capacity: 11 gallons
Coolant tank capacity: 9 gallons
Shuttle stroke: 0-33" (will multi stroke)
Vise control: Hydraulic
Table height: 32"
Machine workload: 8,000 Lbs.
Dimensions: 135" x 90" x 66"
Weight: 7,700 Lbs.

Equipped with:
Full Capacity Overhead Bundling - hydraulically powered overhead clamp that moves down on the material from above.  Its downward (clamping) and upward (unclamping) movement are controlled and timed with the opening and closing of the moveable vise.  Very effective and necessary for bundle cutting various material shapes, widths & sizes. Can also be effective in dampening of cutting vibration.
Variable Vise Pressure - allows for adjustment of the clamping pressure of both vises.  Recommended for thin wall tubing and other light material applications where standard vise pressure may deform the material.
Out of Stock Switch - mounted on the shuttle vise, when the vise closes and no material is between its jaws, the machine hydraulics will shut down. (The cut in progress at the time of the switch being tripped is allowed to be finished before shut down occurs) This option allows the machine to be left unattended with no danger of the machine continuing to cycle with no material left.
Vertical Rollers - two 3” diameter rollers mounted vertically at each side of the end of machine’s infeed conveyor.  Assists in material alignment.
Heavy duty full stroke vises
Cast iron guide arms and wheels with a rigid pivot point
Powered blade chip brush
Chip auger

heavy duty motor and gear box with variable frequency drive system


We put our Bandsaws through a 20 Point Inspection and Repair Process assuring immediate performance when they hit your floor.
Request a quote
Print Details

or call us at 800-899-8182