Maximum board width: 37"
Maximum board thickness: 6"
Minimum board length: 12"
Minimum borard thickness: 1/8"
Feed rate: 15-49 FPM variable
Sanding belt speed: 2,625 FPM
Sanding belt size: 37" x 75"
Table height: 31-3/8" - 37-3/8"
Air pressure required: 75 - 80 PSI
Dust port size: 5" O.D.
Minimum dust collector required: 1,600 CFM (dust collector not included)
Number of dust ports: 3
Feed belt motor: 1 H.P.
Lift table motor: 1/4 H.P.
Main motor: 20 H.P.
Voltage: 220 / 440 volt 3 phase
Dimensions: 53" x 58" x 72"
Weight: 2,090 Lbs.
Centralized controls allow you to access all the needed buttons on one simple panel.
The auto thicknesser will capture the piece of wood to give the user the exact starting thickness.
The variable speed feed belt allows you to accurately dial in the exact feed speed to best suit your project.
Digital readout will show the user the exact thickness of the finished piece, or will allow you to preset exactly the thickness you prefer for the finished piece.
The disc brake slows the machine quickly and will activate immediately to stop the machine in an emergency.
The pneumatic sensor system controls the sanding belt oscillation to prevent the belt from running off the ends of the drums, as well as use the sanding surface more uniformly without leaving sandning lines on the workpiece.
The three motor system allows for maximum horsepower to independently power the sanding drums, the variable speed feed, and the feed table movement.